Skip to main content

Ginetta G15


The Ginetta G15 was a British sports car made by the Ginetta company in Witham, Essex between 1968 and 1974. The car was initially available only in kit form but later some factory built examples were available. It was launched at the 1967 London Motor Show.

The body was of glass fibre and was mounted on a tubular steel chassis. The engine and four speed transmission were taken from the Hillman Imp range and were rear-mounted driving the rear wheels. The suspension was by independent coil springs at the front and rear with the front steering/suspension derived from the Triumph Herald. The car used 13 in (330 mm) wheels as opposed to the 12 in (305 mm) of the Imp giving higher gearing. The front compartment where the engine would have been on a front engined car contained the fuel tank and spare wheel leaving no room for luggage.

The first few cars retained the Imp rear cooling radiator but tended to overheat so in 1969 a Mk ii version with front mounted radiator with electric fan was fiited instead which cured the problem. The Mk II also had a revised dashboard and improved seats. A heater and windscreen washers were optional extras.

The 1970 MK III had larger rear quarter light windows.

Comments

Popular posts from this blog

Westfield XI

The Westfield XI or Westfield Eleven is a British sports car and kit car based on the Lotus Eleven. In 1982 Westfield Sportscars, responding to the popularity of the original Lotus XI, started production of a replica with a fiberglass body available as either a finished car or kit car. Initially called the Westfield Sports, the factory-finished cars were usually fitted with an uprated 1,275 cc (77.8 cu in) BMC A-Series engine, although some factory cars were fitted with Ford Kents. The majority of Westfield XIs are sold as self-build kits without engines and designed to accept the 1275cc A-series from a donor MG Midget or Austin-Healey Sprite. Owners have fitted a variety of engines, including Coventry Climaxes, Lotus twin-cams and Alfa Romeo engines, although engine fitment is limited by the small size of the engine bay. The kit is designed to utilise other components from a donor Sprite or Midget: the rear axle (modified by Westfield), gearbox, driveshaft, front upright/brake assembl...

Yamaha OX99-11

The 'Yamaha OX99-11' V12 was a sports car designed by Yamaha's subsidiary Ypsilon Technology and IAD, an English engineering consultancy, which was supposed to enter production in 1994. Yamaha began competing in Formula One as an engine supplier in 1989, and using the experience it had gained during that time it wanted to build a price-no-object car based on actual Formula One technology. Even though the Formula One project was doing poorly in competition, by 1991 the team had just produced a new engine, the OX99, and approached a German company to design an initial version of the car. Yamaha was not pleased with the result as it was too similar to sport cars of that time, so it contacted IAD to continue working on the project. By the beginning of 1992, just under 12 months after starting to work on the project, IAD came with an initial version of the car. The car's design was undertaken by Takuya Yura, and was originally conceived as a single seater. However Yamaha req...

Chrysler 300C Hemi

The Chrysler 300C Hemi is a full-size flush sports car aboriginal apparent at the 2003 Fresh York Auto Show as a abstraction car. Sales in the U.S. began in the bounce of 2004 as an aboriginal 2005 archetypal year car. Advised by Ralph Gilles, the fresh 300 was congenital as a high-end auto while the SRT-8 archetypal was advised to be the high-performance version. The Chrysler 300 is additionally marketed in Australia, as the aboriginal full-size Chrysler agent awash there back the Valiant was discontinued in 1981. The car will be awash in Europe as the Lancia Thema alpha in October 2011. However, it will abide branded as the Chrysler 300 in the UK and Ireland only.